Door Repairs Near Me
Every home requires door repairs. They allow us to enter and exit our homes, and they aid in the security of the home. Experts in door repair can make sure that your doors function properly and enhance the appearance of your home.
Enter your zip code to find rated and reviewed professionals close to you.
Broken Glass
Broken glass is an issue that is common in homes and businesses. It can be caused by a range of factors, including children throwing baseballs at windows or a person knocking a mirror off the wall. It's a hassle and a pain to deal with broken glass, no matter the cause.
The most important thing to do is collect the pieces of broken glass and dispose of them properly. This is important because broken glass, especially when it is broken into small pieces, can be dangerous. lock repair near me can cut skin and create lacerations just like sharp knives, needles and razors. It is also a health hazard because it is contaminated with blood, toxic chemicals and infectious agents which enter the body through a cut or puncture.
Bostik Fix & Glue can be used to repair damaged glass. This adhesive can be used to repair glass items that have small impact cracks, such as picture frames windows, panes of glass, door sidelights mirrors, glassware for kitchens. It can be used to repair single-pane windows as well as certain automotive glass. Cracks should be dry and clean to ensure that the glue is adhered.
The adhesive can be applied using a fine nozzle and the areas to be repaired need to be lightly pressed together. This will allow the glue to bond instantly, and stop the cracks spreading. However, it is important to note that small cracks will still be visible following repair, although they won't be as prominent as before. It is also essential to avoid extreme temperature fluctuations because cracks could expand and contract, leading to further damage.
Broken Locks
If your lock fails to function properly, it can leave your home vulnerable to burglars. If you have a DIY repair kit, you can fix broken locks yourself without needing to engage a professional. First, you need to determine the root cause of the issue. There are a variety of possible issues, including an alignment issue or a damaged key. It is crucial to fix the lock as soon as it breaks before it causes any further issues.
If you're able to turn the key in the lock but it won't remain in, you may require replacing the latch bolt or the lock cylinder itself. It's also recommended to check the hinges and frame of the door to make sure they're not damaged or loose because this could be another cause of broken locks.
A jiggly-lock indicates that the bolt has not entered or exited the strike plate correctly. You can fix this by moving the strike plate slightly. Be careful not to move it far. If you move the strike plate too often, the set screw holes on the plate will become too large. This could lead to an unstable lock.
If you put the key in the lock but it does not turn, it could be dirt or rust in the keyway. Use a lubricating solution to help the key move freely. You can also use dry lubricants, such as graphite powder.
A lock that spins is an indication that the tailpiece in the lock has been damaged. This is typically a cheap component to purchase from a locksmith, and it can be replaced in a few minutes.
A bent key is danger to your security, since it can snap into the lock and block access to your door. You can flatten and reshape the key using the aid of a vise. If you don't own an instrument to help you, you could employ a hammer for pounding the key between two pieces wood. This will reduce the size of the key and improve its ability to fit into the lock.
Broken Rollers
The rollers keep your door in a proper alignment. If they are damaged, your door could slide off the track. Replacing the rollers is a simple home repair project that can be undertaken by many homeowners. First, you must remove the sliding panel of the door from its track, and then set it aside for now.
Locate the roller adjustment screws on the bottom of your door frame and loosen them. This will let you lift the door up and access the broken roller. Note the exact location of the old roller so that you can make sure that the replacement is in the same spot.
Then, remove the roller from the track and check it for any damage. If you see that the roller is bent, try to bend it back into place using a pair of metal bending pliers. If you aren't able to bend the wheel back into place, it may be necessary to replace the entire roller. Install the new roller by following the same steps you used to remove the previous one.
While you're at it, you might also think about lubricating the rollers. This will decrease friction, allowing for the door move smoothly. Just be sure to use an oil-based lubricant that is not petroleum-based, as petroleum-based ones tend to attract dirt more quickly.
Once you're finished take care to lower the door back onto the track. Be sure that all of the screws or bolts that you removed are replaced and reinstalled properly, and that all of the components are aligned correctly. Also, ensure that you adjust the roller's height if necessary. It should be at a level where the door doesn't rub against the threshold, but still be capable of rolling up easily.
After a few attempts, you will be able the roller replaced and have your door working smoothly once again. It's always a smart idea to contact a professional in case you're not sure of your abilities to do the job. A professional can look into the problem much more easily and determine the best route to take.
Broken Hinges
Over time the weight of the door can cause the hinges become loose. This is particularly true when the screws within the door frame have been stripped. This is a common problem that can be easily repaired with only a small amount of effort. To fix the issue, you can follow a simple procedure that involves drilling out the screw and using dowels to fill the hole before installing a new screw.
This method is especially useful for wooden frames and is a better option rather than trying to tighten long screws through the stripped hole. Long screws can cause further damage to the wood. This method permits dowels of the same size as existing holes, which provide a stronger and secure fix.
It is important to determine the size of the screw prior to drilling a new hole. One way to check this is to check the location of the previous screw in the frame with a spirit-level. Once you have found the screw hole, you are able to take out the screw that was previously there. It shouldn't be too difficult as the screw holes can often be enlarged by the screws.
Next, measure the thickness of your door jamb. Cut lengths of hardwood dowels that are a bit shorter than the measurement. Once the dowels are cut, they must be placed in the screw hole that is new. Carpenter glue should then be applied to both sides.
After the glue has dried, it's required to drill a new screw into the hinge hole as well as the dowel. After the screw is in place it is essential to give the dowel time to fully close.
To help prevent future issues in the future with your door hinges, it is recommended to spray them with the lubricant regularly. This will stop them from getting stuck in either the closed or open positions. You should be able to find a door hinge grease at your local home improvement retailer.